ABB OmniCore C90XT - Page 318

Note/IllustrationAction
Screws: Hex socket head cap screw M5x50
12.9 Gleitmo 603+Geomet 500 (3 pcs)
Secure the frame and cover strip with the
screws.
4
Tightening torque: 2 Nm - 3 Nm.
xx1900002334
xx1900002333
Route the cables through the cut-out.5
Continues on next page
318 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.6 Replacing the cable grommet assembly
Continued