Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)Refit the cable entry frame to the enclos-
ure wall and secure with the screws.
6
Tightening torque: 1.5 Nm.
xx1900002332
Refitting the cable grommet assembly
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001446
Continues on next page
Product manual - OmniCore C90XT 319
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.6 Replacing the cable grommet assembly
Continued
To Next Page
Loading...
