ABB OmniCore C90XT - Page 320

Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)Insert the cable grommet assembly into
the cover of the cabinet.
3
xx1900002340
Secure it with the screws.
Concluding procedure
Note/IllustrationAction
Closing the door on page 174.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
2
320 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.6 Replacing the cable grommet assembly
Continued