ABB OmniCore C90XT - Page 415

DescriptionStandard
Arc welding equipment - Part 10: EMC requirementsIEC 60974-10:2014
i
Classification of air cleanlinessISO 14644-1:2015
ii
Degrees of protection provided by enclosures (IP code)IEC 60529:1989 + A2:2013
i
Only valid for arc welding robots. Replaces IEC 61000-6-4 for arc welding robots.
ii
Only robots with protection Clean Room.
Product manual - OmniCore C90XT 415
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
8 Reference information
8.2 Applicable standards
Continued