6.6 GOOSE performance
RIO600 meets the horizontal communication performance criteria for protection
purposes defined by IEC61850-5, device-to-device communication under 10 ms.
RIO600 also supports sending and receiving analog values using GOOSE messaging.
In case of an mA/RTD input, transferring the event via GOOSE requires 250 ms. It
takes 50 ms to drive the mA ouput signal in AOM after receiving the GOOSE
command.
In case of SIM8F, the metering values are sent over GOOSE based on the set
parameter Update interval for Metering values.
Section 6 1MRS757488 H
Commissioning
170 RIO600
Installation and Commissioning Manual
To Next Page
Loading...
