ABB Remote I/O RIO600 - LD0.AOMGGIO Physical I;O Values

Reg A Type Scale IEC61850 name SA name Description Values
768 u16 1 .AnIn1.range / .AnIn2.range RTD Channel Range
Information
Channel - 2 (High Byte)
Channel - 1 (Low Byte)
Normal = 0
High = 1
Low = 2
High High = 3
Low Low = 4
769
u16 1 .AnIn3.range / .AnIn4.range RTD Channel Range
Information
Channel - 4 (High Byte)
Channel - 3 (Low Byte)
LD0.RTDGGIO10 RTD-10
776 u16 1 .AnIn1.range / .AnIn2.range RTD Channel Range
Information
Channel - 2 (High Byte)
Channel - 1 (Low Byte)
777
u16 1 .AnIn3.range / .AnIn4.range RTD Channel Range
Information
Channel - 4 (High Byte)
Channel - 3 (Low Byte)
7.2.9 LD0.AOMGGIO physical I/O values
mA output (AOM4) module information can be accessed with the addresses listed in
the table.
Table 134: LD0.AOMGGIO physical I/O values
Reg A
Scale IEC 61850 name SA name Description Values
LD0.AOMGGIO1 16 bit signed Integer
224 Value reported with a scale
factor of "1" when channel
configured as dimensionless
and with a scale factor of "100"
when channel configured as
mA
.AnOut1.mxVal.f
AOM 1-Channel 1 Output Value 0.0...20.0 [mA] /
-32768...+32768
1)
225 .AnOut2.mxVal.f AOM 1-Channel 2 Output Value 0.0...20.0 [mA] /
-32768...+32768
1)
226 .AnOut3.mxVal.f AOM 1-Channel 3 Output Value 0.0...20.0 [mA] /
-32768...+32768
1)
227 .AnOut4.mxVal.f AOM 1-Channel 4 Output Value 0.0...20.0 [mA] /
-32768...+32768
1)
228 <reserved> <reserved> 0
229 <reserved> <reserved> 0
230 <reserved> <reserved> 0
231 <reserved> <reserved> 0
232 <reserved> <reserved> 0
233 <reserved> <reserved> 0
234 <reserved> <reserved> 0
235 <reserved> <reserved> 0
236 <reserved> <reserved> 0
237 <reserved> <reserved> 0
238 <reserved> <reserved> 0
Table continues on next page
1MRS757488 H Section 7
Modbus TCP communication
RIO600 205
Installation and Commissioning Manual