ABB Remote I/O RIO600 - Supervision Data

Bit A Reg A IEC 61850 name SA name Description Values
2798 1586.14 <reserved> <reserved>
2799 1586.15 OPEN_CB Circuit Breaker Open
Command
0/1 = Off/On
2800 1587.00 CLOSE_CB Circuit breaker Close
Command
0/1 = Off/On
2801 1587.01 <reserved> <reserved>
1) Applicable (read and write) data attributes are mentioned under their respective data objects.
LD0.SCMLGGIO/LD0.SCMHGGIO
- .SPCSO1.stVal
- .SPCSO2.stVal
- .SPCSO3.stVal
- .SPCSO4.stVal
LD0.SCMLPGGIO/LD0.SCMHPGGIO
- CLOSE_ES
- OPEN_ES
- CLOSE_DS
- OPEN_DS
LD0.SCMLDGGIO/LD0.SCMHDGGIO
- CLOSE_DS
- OPEN_DS
LD0.SCMLEGGIO/LD0.SCMHEGGIO
- CLOSE_ES
- OPEN_ES
LD0.SCMLCGGIO/LD0.SCMHCGGIO
- OPEN_CB
- CLOSE_CB
7.2.46 Supervision data
Supervision data register addresses provide information about the file revision and
checksum of RIO600’s configuration and IO parameter file. It also provides
information about the firmware version (major, minor and patch) and its checksum of
the modules present in the RIO600.
Table 172: Supervision data
Reg A
Type Scale IEC 61850 name SA name Description Values
2260 Unsigne
d 16
1 RIO Configuration File
Revision
0...65535
2261 Unsigne
d 16
1 RIO Configuration File
Checksum
0...65535
2262 Unsigne
d 16
1 Reserved For Future Use 0
2263 Unsigne
d 16
1 IO Parameters File Revision 0...65535
2264 Unsigne
d 16
1 IO Parameters File Checksum 0...65535
2265 Unsigne
d 16
1 Reserved For Future Use 0
: : : : :
2281 Unsigne
d 16
1 Reserved For Future Use 0
Table continues on next page
Section 7 1MRS757488 H
Modbus TCP communication
258 RIO600
Installation and Commissioning Manual