• IEC 61850 connectivity with support of standard versions Edition 1 and Edition
2
• IEC 61850 GOOSE for real-time information exchange on the Ethernet station
bus
• Modbus TCP/IP support for one client
• Standard RJ-45 interface with 10/100 Mbits/s or 100 Mbit/s multimode fiber-
optic LC Ethernet interface
• Auxiliary power supply
• Easy-to-use configuration tool for the IEC 61850 data mapping
• Reduced conventional cabling
• Up to 40 configurable binary and analog I/O channels
• DIN rail mountable modules
• Support of two SNTP servers
• WHMI-based monitoring
• Subscribes and publishes GOOSE messages from/to multiple IEDs as configured
• "Stand-alone" operation, with support of intermodule logic
3.1.1 Product version history
Product version Modules supported Product history
1.0 MOD600ALECMIR
MOD600APSMH
MOD600ADIM8H
MOD600ADOM4
• Communication module with RJ-45 port
• High power supply module
• Digital input module with eight inputs high-
power supply
• Digital output module with four outputs
1.1 MOD600BLECMIR
MOD600APSML
MOD600ADIM8H
MOD600APSMH
MOD600ADIM8H
MOD600ADOM4
New module support added to RIO600 Ver.1.0
• New version for communication module to
support modules below
• Low power supply module
• Digital input module with eight inputs low-
power supply
1.2
MOD600CLECMIR
MOD600ARTD4
MOD600AAOM4
MOD600APSMH
MOD600APSML
MOD600ADIM8H
MOD600ADIM8L
MOD600ADOM4
New module support added to RIO600 Ver.1.1
• New version for communication module to
support modules below
• RTD/mA input module with four channels
• Analog output module with four channels
1.5
MOD600DLECMIR
MOD600ASIM8F
MOD600ARTD4
MOD600AAOM4
MOD600APSMH
MOD600APSML
MOD600ADIM8H
MOD600ADIM8L
MOD600ADOM4
New module support added to RIO600 Ver.1.2
• New version for communication module to
support above features
• SIM8F sensor input module with three-
phase voltage and current input signals
• Modbus TCP/IP support
Table continues on next page
Section 3 1MRS757488 H
RIO600 overview
16 RIO600
Installation and Commissioning Manual
To Next Page
Loading...
