4.2.4 Returning a product damaged in transportation
If damage has occurred during transportation, appropriate actions must be taken
against the latest carrier.
Inform the nearest ABB office or representative. ABB should be notified immediately
if there are any discrepancies in relation to the delivery documents.
4.3 Storing
If the product is stored before installation, it must be done in the original transport
packaging in a dry and dust-free place. Observe the environmental requirements
stated in the technical manual.
Section 4 1MRS757488 H
Unpacking, inspecting and storing
24 RIO600
Installation and Commissioning Manual
To Next Page
Loading...
