The default IP address of the LECM module is 192.168.2.10.
5.3.1 Checking the connection to RIO600
The connection to RIO600 can be checked either with ICMP Ping messages or by
connecting to RIO600 via a Web browser.
1. To check the connection between the PC and RIO600 with ICMP Ping
messages, open the Run dialog box.
2. Type cmd in the Open box.
3. Click OK to access the command prompt.
GUID-06A4AF7C-7A20-4D63-BD70-E2B633777D65 V1 EN
Figure 33: Starting command prompt
4. Ping the IP address of RIO600 by typing, for example, ping
192.168.2.10.
GUID-4C8C424E-1711-4601-A423-F8531B635488 V1 EN
Figure 34: Type ping command
RIO600 responds with valid Ping replies if the connection and used IP address
are correct.
1MRS757488 H Section 5
Installing
RIO600 55
Installation and Commissioning Manual
To Next Page
Loading...
