Section 8 Using the Web HMI
8.1 Accessing the Web HMI
• Type the IP address of RIO600 in the address bar of the Web browser and press
ENTER.
• Ensure that both the computer and RIO600 are configured for the same subnet.
8.2 Navigating in the menu
• Use the menu bar to access different views.
• The General view shows general information about RIO600. The content
of the view varies depending on the RIO600 hardware configuration.
• The Fault view shows RIO600-related fault and warning information.
• The Status view shows status information.
• The Configuration view shows information about the configuration.
• The Communication view shows communication parameter settings.
8.3 Selecting the fault view
The fault view shows RIO600-related fault and warning information. The left column
lists the modules related to the fault or warning, and the right column shows the fault
or warning code with description.
• Click Fault in the menu bar.
• Alternatively click the fault or warning indicator sign (if present) on the
page header.
1MRS757488 H Section 8
Using the Web HMI
RIO600 261
Installation and Commissioning Manual
To Next Page
Loading...
