GUID-1857CDEE-7790-47E7-ABDA-720D2A80DFF6 V6 EN
Figure 3: General view of the RIO600 WHMI
WHMI provides information about RIO600.
• Module hardware version
• Module software version
• RIO600 modules and their statuses
• Latest GOOSE transmitting and receiving information
• Modbus TCP/IP and connection information
• Fault indication and description
• Channel statuses of input/output modules
• RIO600 configuration
• Communication parameters
3.4 PCM600 tool
PCM600 with the RIO600 connectivity package is used for configuring RIO600.
• Configuring RIO600 in the online and offline modes
• Setting the operating parameters for the modules using Parameter Setting
• Performing the I/O mapping across the modules using Signal Matrix
• Reading and writing the configuration and the parameter file to RIO600
• Setting the password using IED Users
• Establishing the GOOSE communication between the devices configured in
PCM600 using IEC 61850 configuration
• Configuring the Modbus communication settings for connection with Modbus
TCP client
• Updating composition of existing RIO600 in online and offline modes
• Migrating from older version of RIO600 to the higher version using IED
Configuration Migration
• Generating Modbus address point list for the configured modules
• Creating graphical logic configuration with Application Configuration
Section 3 1MRS757488 H
RIO600 overview
20 RIO600
Installation and Commissioning Manual
To Next Page
Loading...
