ABB RET670 - Page 848

Name Values (Range) Unit Step Default Description
INFNO_6 1 - 255 InfNo 1 6 Information number for binary input 6 (1-255)
INFNO_7 1 - 255 InfNo 1 7 Information number for binary input 7 (1-255)
INFNO_8 1 - 255 InfNo 1 8 Information number for binary input 8 (1-255)
Table 254: I103SUPERV Non group settings (basic)
Name Values (Range) Unit Step Default Description
FUNTYPE 1 - 255 FunT 1 1 Function type (1-255)
Table 255: I103EF Non group settings (basic)
Name Values (Range) Unit Step Default Description
FUNTYPE 1 - 255 FunT 1 160 Function type (1-255)
Table 256: I103FLTDIS Non group settings (basic)
Name Values (Range) Unit Step Default Description
FUNTYPE 1 - 255 FunT 1 128 Function type (1-255)
Table 257: I103FLTSTD Non group settings (basic)
Name
Values (Range) Unit Step Default Description
FUNTYPE 1 - 255 FunT 1 1 Function type (1-255)
Table 258: I103AR Non group settings (basic)
Name
Values (Range) Unit Step Default Description
FUNTYPE 1 - 255 FunT 1 1 Function type (1-255)
Table 259: I103MEAS Non group settings (basic)
Name
Values (Range) Unit Step Default Description
RatedI_A 1 - 99999 A 1 3000 Rated current phase A
RatedI_B 1 - 99999 A 1 3000 Rated current phase B
RatedI_C 1 - 99999 A 1 3000 Rated current phase C
RatedI_N 1 - 99999 A 1 3000 Rated residual current IN
RatedV_A 0.05 - 2000.00 kV 0.05 230.00 Rated voltage for phase A
RatedV_B 0.05 - 2000.00 kV 0.05 230.00 Rated voltage for phase B
RatedV_C 0.05 - 2000.00 kV 0.05 230.00 Rated voltage for phase C
Table continues on next page
Section 4 1MRK504116-UUS C
Station communication
842
Application manual