16
111
16 - System
Choose the le you want to upload or download and click the corresponding button. A dialog ap-
pears in which you can select the source or destination of the le, depending on whether you are
uploading or downloading. You can follow the progress in the status eld on the right. Do not close
the applet until the status eld indicates that the process is nished.
The following les can be uploaded.
Bootloader. Software handling le uploads, reprogramming memory areas, etc.
Application rmware. Software handling all outputs and input, performing calculations, etc. Usually
just called "rmware".
Application script. A script that turns the hardware into a WMPro.
Application web. The web pages in the WMPro.
User web. Web pages that are specic to a particular user.
These les can be downloaded as well as uploaded:
Application init. A settings le that can be generated in the WMPro. The le can also be imported
from another device to make a copy. There are more details in "Advanced functions" further down.
Parameter bank. The parameter bank. You should not import the parameter le from another device.
User script. Script le determining how the device works. The le can also be imported from another
device to make a copy.
Database. The whole database in binary format. Important: This le can only be uploaded to a WM-
Pro with exactly the same database settings.
User le 1—6. Images for overviews, logos, etc.
To Next Page
Loading...