16
112
16 - System
16�4�2 Bundles
You can also use the le manager to create, download or
upload bundles. There are three ways to create a bundle.
If you click Backup or Clone, the necessary les are cre-
ated automatically. You can also select the les you want
to include in the bundle by clicking the boxes next to the
les then clicking the "Selected" button. After clicking any
of these le you will see a dialog in which you can give the
bundle a name and specify where you want to save it. Important: You will need to create an ap-
plication init le before you can generate a backup or a clone. See the next section.
It is just as easy to reset a bundle. Simply click the Upload Bundle button. Select the bundle you
want to upload.
When using the le manager, remember not to close the page or switch to another page until the
status eld indicates than the current process has nished.
16�4�3 Advanced functions
Application init is a local copy of the application parameters. The le contains the settings for chan-
nels, parameters, databases, alarms, curves, summaries and overviews. You can copy the le to
another module if you want to use the same settings there. To fully clone the device, you should
also copy the user script and user les. All these les are imported automatically if you use bundling
(above). Important: You must save the le before you can download it�
There are three buttons for the ini le: Create, Erase and Use. When you have nished changing the
settings, click Create. The le is saved locally in the device, and you can load it at any time by clicking
Use.
Use Delete to remove the le from the device. If you want to save the le to your computer, you need
to download it as described in 16.6.1. If you upload a cloned bundle, it will contain the application
init le. In this case, the application will be initialised automatically. If the application init le is up-
loaded in some other way, you will need to click the Use button yourself.
Bundles
The le manager can create and
bundle all the les necessary for
cloning a WMPro with a single
click. And it is just as easy to im-
port bundle.
To Next Page
Loading...