9
70
9 - Time control
9�2�3 Editing the night setback calendar
Click on the name. Change the name to Night setback and click Update.
We are going to build up a week schedule day by day. Some days will be the same. In principle, a day
begins at 00:00:00 and ends at 24:00:00. This means that a night setback that starts at 23:00:00 on
one day and ends at 05:00:00 on the next day has to be divided between two calendar items.
For example, you will need to create three calendar items to reduce the temperature from 23:00
Mondays to Thursdays and from 01:00 Saturdays to Mondays and public holidays, and to increase
the temperature at 05:00 every day. One item reduces the temperature from 23:00 to 24:00 Mondays
to Thursdays. Another item reduces the temperature from 00:00 to 05:00 Tuesdays to Fridays. A third
item reduces the temperature from 01:00 to 05:00 Saturdays to Mondays and public holidays.
Click on the rst calendar item. Enter the start time 23:00:00 and stop time 24:00:00. Check the
boxes from Monday to Thursday. Check the Active box and save by clicking OK.
Click on the next calendar object and enter the
start time 00:00:00 and stop time 05:00:00. Con-
tinue as for the rst item.
Click on the third calendar object and enter
the start time 01:00:00 and stop time 05:00:00.
Check the boxes from Friday to Sunday. Check
the Active and Use weekday catalog boxes. Con-
rm by clicking OK.
After creating all three calendar items, the page
looks like this.
To Next Page
Loading...
Need help?
General