148
Using the meter as a diary5
5.2 Retrieving averages
The meter can calculate averages from the saved
results.
You can choose which results are used for calculation
of the averages.
all results
only results agged
Before meal
only results agged
After meal
When you have made this selection, you can choose
the period of time in which the results were obtained.
the last 7 days
the last 14 days
the last 30 days
The average will be calculated from all results corres-
ponding to your choice. However, the following results
will not be included in the calculation:
control tests (agged with
),
results you have agged with
(General),
results displayed as
or ,
results of tests performed outside the permitted
temperature range of +10 to +40 °C (agged
with
).
To Next Page
Loading...
