Accu-Chek Mobile User Manual

173
Acoustic mode 6
6.4 Announcement of saved test results
Only the last (most recent) of the saved test results is
announced acoustically.
The result is announced three times in succession. The
announcement follows the same pattern as the an-
nouncement of a result immediately after the test. You
will hear:
result result result.
If you directly retrieve saved results using the button
, you will at rst hear the power-on beep and im-
mediately afterwards the result:
result result result.
Flags are not acoustically announced. If you ag the
last saved result with
(General), (Before food) or
(After food), this result will be announced like a
non-agged result.
If XX.X or X.X is displayed as the last (most recent)
result, the last test did not deliver any result (see
Chapter 5.1). In this case, the sounded beeps are
identical to those for an error message (see next page).
There is no acoustic announcement when
the last saved result is a control test agged with

,
no results are saved,

you retrieve an average.


Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)