EasyManuals Logo

Accu-Chek Mobile User Manual

Accu-Chek Mobile
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #203 background imageLoading...
Page #203 background image
203
Replacing the test cassette 12
Replacing the test cassette12
If you want to replace an empty test cassette or an
expired test cassette, please continue reading in Chap-
ter 12.2.
If you want to remove a partly used test cassette which
still has unused test areas, you must rst perform the
preliminary steps described in Chapter 12.1.
You can reinsert a partly used cassette into the meter
at a later date. In the mean time, store this cassette in
a dry place protected from light.
i
If you reinsert the partly used cassette into the
meter and there was another cassette in the
meter before this, the partly used cassette loses
a test area. If you reinsert the started test cas-
sette into the meter immediately, it does not
lose a test area.

Table of Contents

Other manuals for Accu-Chek Mobile

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Accu-Chek Mobile and is the answer not in the manual?

Accu-Chek Mobile Specifications

General IconGeneral
Measurement TechnologyPhotometric
Sample TypeCapillary whole blood
Sample Size0.3 µL
Test Time5 seconds
Battery Type2 AAA batteries
ConnectivityUSB
Dimensions121 x 63 x 20 mm
Weight129 g (with batteries)
DisplayLCD
Memory Capacity2000 results
Measuring Range0.6 - 33.3 mmol/L
Operating Temperature10 - 40°C
Operating Humidity10 to 90% RH
Hematocrit Range20 to 70%
Test Strip TechnologyNo test strips required (uses a test cassette)

Related product manuals