Accu-Chek Mobile User Manual

219
Testing and storage conditions 15
15.2 Light conditions
Displayed text, numbers and symbols appear yellow.
Bright light shining on the display may make them
difcult to read. Shield the meter if necessary, with
your body, for example.
Keep the meter away from very strong light
sources (e.g. direct sunlight, spot lights). These
may interfere with the proper functioning of the
meter and lead to error messages.
15.3 Local sources of interference
Strong electromagnetic elds may interfere with
the proper operation of the meter. Do not use
the meter close to sources of strong electro-
magnetic radiation.
To avoid electrostatic discharge, do not use the
meter in a very dry environment, particularly
one in which synthetic materials are present.
NOTICE:
This device complies with Part 15 of the FCC Rules and
with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)