Accu-Chek Mobile - Removing the Protective Film from the Display; Removing the Protective Strip from the Batteries

48
Initial steps before testing2
2.4 Removingtheprotectivelmfromthe
display
The meter’s display is protected by a protective lm.
Peel this protective lm off.
2.5 Removing the protective strip from the
batteries
The meter is supplied with batteries inserted. The
battery contacts are covered with a protective strip to
prevent premature loss of battery power. This protect-
ive strip must be removed before you can start using
the meter.
Pull the protective strip backwards out of the meter.
i
Instructions for changing the batteries are given
in Chapter 14.