Accu-Chek Mobile User Manual

189
Performing a display check 9
Performing a display check9
If you wish to check whether the display is working
properly, in addition to turning on the meter, you can
also do this via the display check in the Tools menu. In
this case, the display check is shown until you cancel it
(for no longer than 1 minute).
1 Turn on the meter with
,
➔ wait for the Main menu,
➔ use
to select Tools,
➔ press
to open Tools,
➔ use
to select Display check,
➔ press
to open Display check.
2 Press (OK).

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)