Accu-Chek Mobile User Manual

205
Replacing the test cassette 12
12.2 Replacing the cassette
or
or
1 Place your nger on the corrugated area on the tip
cover and push it in the direction of the arrow as
far as it will go.
If you have prepared for the cassette replacement via
Change cass. the meter prompts you to replace the
test cassette. Shortly after this, it turns off automati-
cally.
If the cassette in the meter is empty or has a prob‑
lem or has expired, the appropriate message or error
message E-1 appears after the display check and the
number of available tests (see also Chapter 16.2 and
16.4). Shortly after this, the meter turns off automati-
cally.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)