Accu-Chek Mobile User Manual

59
Testing blood glucose 3
Setting the penetration depth
Depth setting
indicator
Half settings
You can set the penetration depth of the lancet to 1 of
11 possible settings (0.5–5.5). The silver line (depth
setting indicator) on the lancing device indicates the
current penetration depth setting. The higher the num-
ber the deeper the penetration. The half settings for the
penetration depth are indicated by a dot. The penetra-
tion depth 1.5 is set when the line points to the dot
between 1 and 2.
If you have no experience of using this lancing device,
we recommend that you start with a medium penetra-
tion depth setting such as 3.
Rotate the cap of the lancing device until the desired
penetration depth is level with the indicator.
i
Do not lance your nger until you are told to do
so in the further course of the User’s Manual.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)