Accu-Chek Mobile User Manual

228
Symbols, messages, problems and error messages16
16.3 Problems
The meter will not turn on.
The batteries are empty or none are inserted.

Insert new batteries.
You have inserted the batteries the wrong way

round.
Remove the batteries and reinsert them as shown in
the battery compartment.
The ambient temperature is low and the batteries

are almost empty.
Move to a place where the temperature is between
+10 and +40 °C and wait for the temperature of the
meter to adjust to this temperature. Insert new
batteries.
Condensation has affected the electronics.

Allow the meter time to dry slowly.
The meter is defective.

Contact Accu-Chek Customer Care at
1-800-363-7949.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)