Accu-Chek Mobile User Manual

177
Checking the meter 7
7.2 Performing a control test
Start as for a blood glucose test: Either open the tip
cover or select Test in the Main menu.
The following description assumes that you start the
test by opening the tip cover.
1 Place your nger on the corrugated area on the tip
cover and push in the direction of the arrow as far
as it will go.
After overcoming a slight resistance, the tip cover
clicks into place.
Be careful not to touch the tape when doing this
as this could damage it.
If the meter was turned off, it now turns on.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)