Accu-Chek Mobile User Manual

170
Acoustic mode6
6.1 Beep tone when turning on
When the acoustic mode is turned on, you hear a beep
(
) when you turn the meter on.
This is irrespective of how you turn on the meter:
by opening the tip cover to perform a test (see

Chapter 3.2)
using the

button (see Chapter 1.6)
using the

button to view saved results (see
Chapter 5.1)
using the

and buttons to transfer data (see
Chapter 5.3)
6.2 Beep tones during a test
After the power-on beep, you will hear the following
while you test
a beep tone when the meter advances a test area to

the tip of the cassette,
a beep when you can apply blood or control solution,

a beep when the test starts,

the result which is composed of different beeps (see

Chapter 6.3),
several beeps if the meter displays an error mes-

sage (see Chapter 6.5).

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)