Accu-Chek Mobile User Manual

141
Adjust settings 4
Correcting a wrongly set language
If you have set the wrong language by mistake, you
may not be able to read the menus any more. You can
still change the language with the help of the following
instructions.
1 Turn on the meter with
.
3 Press 3 times.
The “Settings” menu is now highlighted.
4 Press
.
5 Press
6 times.
The “Language” menu (the last item) is now high-
lighted.
6 Press
.
The “Language” menu is now open.
7 Use
to select the desired language.
8 Press
.
The meter will then display the language you just
selected.
9 Press
.
The meter returns to the “Settings” menu.
2 Wait until the display sequence shown above has
been displayed and the display does not change
anymore.
The last (right-hand) display is the main menu, but with
the text displayed in the wrongly set language.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)