30
Getting to know your meter and lancing device1
1.6 Turning on the meter
With the meter off, press and hold the On/Off button
until the meter turns on (longer than 2 seconds).
In the remainder of the User’s Manual, this instruction
will appear in the following abbreviated form:
1 Turn on the meter with
.
The meter rst runs a display check in which a black
and yellow checkerboard pattern of small illuminated
dots is displayed.
2 Check that there are no irregularities in the
checkerboard pattern.
Some examples of irregularities in the checkerboard
pattern are shown in Chapter 9.
To Next Page
Loading...
