Accu-Chek Mobile User Manual

187
Checking the meter 7
Did you perform the control test according to
the User’s Manual?
yes
Did you wait for the application prompt to be
displayed before applying control solution?
yes
Did you apply the control solution immedi-
ately after opening the applicator?
yes
Did you enter the correct color? yes
Did you perform the test within the correct
temperature range (10–40 °C)?
yes
Has the expiry date for the control solution
been reached (see label on the bottom of the
vial next to the symbol
)?
no
Did you read the section “Storage and stabil-
ity of control solutions” in the package insert
for the control solution?
yes
Did you observe the proper storage condi-
tions for the meter, test cassette and control
solutions (see Chapter 15 and the test cas-
sette and control solution package inserts)?
yes
If your meter has been dropped, that can also lead to
control test results which are not within the concentra-
tion range displayed and for which Control test not OK
is displayed. In this case, you should also call
Accu-Chek Customer Care.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)