Accu-Chek Mobile User Manual

226
Symbols, messages, problems and error messages16
Temperature too low / too high: This message ap-
pears at the start of a test if the ambient temperature
or the temperature of the meter is between +8 and
+10 °C or between +40 and +42 °C.
Use
, to select whether you wish to Test or Quit.
Test:

in this case, the meter advances a test area.
Quit:

in this case, the meter returns to the Main
menu. Close the tip cover.
If you decide to perform the test in spite of the warn-
ing, the result will be agged and saved with the sym-
bol
.
Do not use blood glucose results obtained follow-
ing these warnings as a basis for making thera-
peutic decisions. These results may be incorrect.
Incorrect results can cause the wrong therapy
recommendation to be made and thus produce
serious adverse health effects. Move to a place
where the temperature is between +10 and
+40 °C and wait for the temperature of the me-
ter to adjust to this temperature.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)