Accu-Chek Mobile User Manual

Drop of blood that is well-formed Drop of blood that has spread
Do not apply blood at the edgeApply blood at the centre
65
Testing blood glucose 3
Create a blood drop that is large enough and well-

formed. Do not apply the blood drop if it has spread.
Do not use one and the same drop for several tests.

i
Additional information
At a particular time, the meter prompts you to apply
blood. You then have about 2 minutes to obtain a blood
drop and apply it to the test area. If you do not apply
blood to the test area within this period, the meter
turns off. The test area that had been made available
will be lost as the meter will advance a new test area
next time.
Immediately apply the blood to the test area after

you have created the drop and the meter displays
Apply blood.
Do not touch the test area more than

gently when
applying blood. Do not press the test area onto the
nger and do not spread the drop of blood.
Apply the drop at the

centre of the cassette tip and
not at the edge.

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)