Accu-Chek Mobile User Manual

68
Testing blood glucose3
You can also open the tip cover if the meter is already
turned on. In this case, the meter then switches to Test.
It advances a test area to the tip of the cassette and
then the prompt Apply blood appears.
The following are the exceptions:
If you are in the

Settings menu entering a number
(e.g. to change the time) or in the selection list (e.g.
to change the volume): in this case, when you open
the tip cover you will be asked whether you really
want to perform a test (see Chapter 16.2).
If you had turned on the meter using the

or
button (see Chapter 5.1 and 13): In this case, the
meter does not switch to Test. You must rst turn off
the meter. Then you can start the blood glucose test
either by opening the tip cover or via the Main menu
(see next page).

Accu-Chek Mobile Specifications

General

Measurement Technology	Photometric
Sample Type	Capillary whole blood
Sample Size	0.3 µL
Test Time	5 seconds
Battery Type	2 AAA batteries
Connectivity	USB
Dimensions	121 x 63 x 20 mm
Weight	129 g (with batteries)
Display	LCD
Memory Capacity	2000 results
Measuring Range	0.6 - 33.3 mmol/L
Operating Temperature	10 - 40°C
Operating Humidity	10 to 90% RH
Hematocrit Range	20 to 70%
Test Strip Technology	No test strips required (uses a test cassette)