70
Testing blood glucose3
4 Place your nger on the corrugated area on the tip
cover and push it in the direction of the arrow as
far as it will go.
Be careful not to touch the tape when doing this
as this could damage it.
When you have opened the tip cover, a beep sounds (if
Beeps tones is turned on) and the meter advances a
test area to the tip of the cassette.
Be careful not to touch the tape when doing this
as this could damage it.
Shortly after the test area has been advanced to the tip
of the cassette, the prompt Apply blood will appear and
a beep will sound again (if Beeper is turned on).
To Next Page
Loading...
