75
Testing blood glucose 3
2 Take your nger away from the test area as soon
as Test in progress and the hourglass symbol
appear on the display.
The test area has then absorbed enough blood and a
beep sounds (if Beeper is turned on). The hourglass
symbol indicates that the test is in progress.
Testing is complete after approximately 5 seconds. The
result appears on the display and the meter beeps (if
Beeper is turned on). At the same time the meter
automatically saves the result. The used test area is
transported away from the tip of the cassette.
If you want to ag the result do not turn the meter off.
The procedure for agging results is described under
“Flagging results”.
If you do not wish to ag the result you can now turn
off the meter (see next page).
To Next Page
Loading...
