110
5.4.5 Viewing the time remaining (pump timer)
For loan pumps and “Backup” pumps, a pump timer limits the
operating time. When you begin using the pump, the timer starts
the countdown of the number of remaining days.
Before the pump timer expires, a Warning will remind you that
the operating life of the pump is coming to an end, so that you
can arrange to get a new pump in good time. The pump timer
1. 2.
symbol appears in the RUN screen or STOP screen. When the
timer expires, an Error occurs, and your pump goes into STOP
mode. It can no longer be put into RUN mode.
See chapter 8 Warning W5: PUMP TIMER, Warning W9:
LOANTIME WARNING and Error E5: END OF OPERATION .
Procedure for viewing the time remaining
Press d to move to the MY DATA
screen.
Press f to select.
Press d to move to the PUMP TIMER
screen.
The number of days remaining until the
pump timer expires is shown.
Press f to exit.
Note This setting is country-specic
and may not be visible on your
pump.