83
4
After this bolus delivery start delay, your pump beeps three times
and vibrates and begins to deliver the total bolus amount
programmed. The countdown of the remaining bolus amount
appears on the display.
4.2.4 Cancelling a Standard Bolus
During programming
(the bolus amount
blinks):
You have three options for cancelling during programming:
j If you do not press any key for 20 seconds after programming the bolus
amount, your pump returns to the RUN screen.
j Return to the Standard Bolus screen by pressing d + a simultaneously.
j Set the bolus amount to 0.0 units. Press f to exit.
No bolus is delivered.
During the start delay
(Standard Bolus symbol
blinks):
Press d + a, s or a. You hear a melody. Your pump returns to the RUN
screen.
A Warning W8: BOLUS CANCELLED occurs.
Press f twice to conrm and turn off the alert. See chapter 8 Warning W8:
BOLUS CANCELLED.
No bolus is delivered.
During bolus delivery
(countdown of bolus
amount):
Press and hold s or a for 3 seconds until you hear a melody.
You can view the actual bolus amount delivered before the cancellation by
looking at the bolus history. See section 5.4.1 Viewing your bolus history.
Bolus delivery is
interrupted.
To Next Page
Loading...
Need help?
General
