87
4
4.3.1 Cancelling an Extended Bolus
During programming
(the bolus amount or
bolus duration blinks):
You can either:
j wait for your pump to return to the RUN screen.
j press d and a simultaneously to exit the Function screen.
j set the bolus amount to 0.0 units and press f.
No bolus is delivered.
During bolus delivery j If the Extended Bolus delivery has begun, it can be cancelled by putting your
pump into STOP mode. This cancels the bolus delivery and a Warning W8:
BOLUS CANCELLED is displayed. Press f twice to conrm and turn off the
alert. See chapter 8 Warning W8: BOLUS CANCELLED. Put your pump back in
RUN mode afterwards.
The bolus amount delivered up to the cancellation can be reviewed in the
BOLUS HISTORY screen. See section 5.4.1 Viewing your bolus history.
Bolus delivery is
interrupted.