13
1
By pressing f again you enter the BOLUS DATA function. You
can view the last 30 boluses by pressing a or s.
You can leave the Quick Info screen either by pressing f again
or pressing no key for 20 seconds.
Information, Function and Set-up screens
You access these screens when you program the pump, perform
a function, change a setting, or store or transfer information. You
can reach these screens from either the RUN or STOP screen.
1.2.4 Navigating through the screens
The following procedure explains how to navigate through
the screens. Think of these screens as menu choices. See
section 1.2.3 Display screens.
1. Press the d key to select a screen of your choice.
2. Press the d key again to see the next available choice in
the menu. (After you reach the last menu choice, you will
return to the rst menu choice.)
3. When you reach the screen of your choice, press the
f button.
The next set of screens are called Function screens, and all
relate to the choice you have just made. There may be one or
several Function screens.
4. Press the s or a key to increase or decrease the
displayed value, or press the d key again to move to the
next Function screen to make further changes. (After you
reach the last Function screen, you will return to the rst
Function screen.)
5. Press the f button to save your changes.
To Next Page
Loading...
Need help?
General
