43
2
Procedure to connect the cartridge, adapter and infusion set
2.
Carefully prepare a new Accu-Chek
infusion set, following the instructions
supplied for use.
w WARNING
To avoid leakage, tightly attach the infusion set to the
adapter. Turn the infusion set luer-lock connector until it
stops. Do not over-tighten or use any auxiliary tools, as this
may crack the infusion set luer-lock connector and result in
leakage of insulin.
Remove the protective cap from the lled
cartridge. (Do not touch the cartridge tip.)
3.
Push the adapter all the way onto the
cartridge tip, to the stop.
Hold the adapter and twist the infusion
set luer-lock connection by hand,
clockwise into the adapter. Do not
over-tighten.
1.
4.
To Next Page
Loading...
