65
3
1. 2.
3.2.1 Short interruptions
Press d to move to the STOP YOUR
PUMP screen.
Press f to put your pump in STOP
mode. Remove the infusion set or, when using a
disconnectable infusion set, disconnect
the transfer set from the headset and use
the protective covers that came with it.
Resuming insulin delivery
Reconnect your infusion set or insert a
new one and put your pump into RUN
mode.
Where appropriate, attach a new
Accu-Chek infusion set. (See section
3.4 Changing the infusion set.)
Measure your blood glucose level within
two hours of restarting pump therapy to
check the function of the system and to
ensure insulin delivery.
3.
1.
To Next Page
Loading...
