78
4.2 Programming a Standard Bolus
There are two ways to program a Standard Bolus:
Quick Bolus Using a and s on your insulin
pump, with bolus increments
determined by the user
Using Standard
Bolus menu
Using d and f to enter the menu
and then a and s to program the
amount
The bolus amount per delivery is limited to 25 units.
After you program a Standard Bolus, there is a delay of 5 seconds
before bolus delivery starts. This delay allows you to cancel the
bolus by pressing the a or s key if desired. The Warning W8:
BOLUS CANCELLED is displayed. Press f twice to conrm and
turn off the alert. See chapter 8 Warning W8: BOLUS CAN-
CELLED.
To Next Page
Loading...
