138
7.
9.
8.
The pump begins the pairing process and
shows a 10-digit code. Enter the code on
the Meter display, using
=, x and z
and then
= to move to the next digit.
Conrm the complete code with
..
10.
Pump screen
Meter screen
Meter screen
After the pairing is completed press + to
turn off the Meter.
The pump now shows the DEVICE PAIRED
screen. Press f to conrm the pairing.
The pump displays the PAIRED DEVICE
screen. You can return to the RUN screen
by pressing f.
If the pairing is not successful in a rst
attempt, wait a few minutes before you
repeat the procedure in a safe or less
crowded environment.
To Next Page
Loading...
