37
2
4.
5.
Press a or s or scroll to set the
hourly basal rate given by your doctor or
healthcare team.
Press d to move to the next hour.
Continue using d and a or s to set
the hourly basal rates for the remaining
hours. This allows you to program your
individual basal rate prole on an
hour-by-hour basis. Continue until all
24 hours are programmed.
6.
7.
Press f to conrm.
The new daily BASAL RATE TOTAL is
displayed.
Press f to save the prole and exit.
Note The increments shown depend on
the programmed basal rate: it will
be
0.01 U from 0.05 U to 1.00 U,
0.05 U from 1.00 U to 10.0 U and
0.1 U from 10.0 U to 25.0 U
To Next Page
Loading...
