71
3
7.
Remove the used infusion headset and
dispose of it correctly.
Carefully prepare a new Accu-Chek
infusion set for use.
Screw the Accu-Chek infusion set
clockwise into the adapter.
Carefully tighten the luer-lock connector
by hand.
6. 8.
9. 10. 11.
Prime the infusion set following the
instructions found in section 2.8 Priming
the infusion set. Prepare the infusion site and insert a new
infusion set following the instructions in
section 2.9 Positioning the infusion set.
Put the pump in RUN mode. See
section 2.10 Starting insulin delivery.
To Next Page
Loading...
