91
4
6.
Tip: Press d to loop between program-
ming the total BOLUS AMOUNT, IMMEDI-
ATE BOLUS and BOLUS DURATION.
Check the total and immediate bolus
amounts and the Extended Bolus duration
programmed on the screens.
Press f to conrm both bolus amounts
and the bolus duration. The Multiwave
Bolus symbol blinks for 5 seconds (bolus
delivery start delay).
8.
The pump beeps three times and
vibrates. The immediate bolus delivery
begins. The countdown of the remaining
bolus continues to appear on the display.
Note If a Temporary Basal Rate is active
at the same time, the remaining
time and amount of the bolus and
the amount of the increased or
decreased hourly basal rate are
displayed on the RUN screen.
7.
To Next Page
Loading...
