Chapter 3: Getting Started
12
Accutome A-Scan Plus Connect User’s Guide
3
Getting Started
Assembling the Accutome A-Scan Plus Connect
The Accutome A-Scan Plus Connect measures the axial length of the eye and
calculates the power of the intraocular lens.
The product consists of an A-Scan Plus Connect Control Unit, 10 MHz
composite a-probe, a USB foot switch, USB Cable (A-B type), test block, quick
reference/installation guide and a CD containing the Accutome A-Scan Plus Connect
software, all in a plastic carrying case.
The user supplies a windows based personal computer with Microsoft XP
service pack 2 or higher.
The Accutome A-Scan Plus Connect is designed to be used in multiple
environments and is as simple as carrying a notebook computer and probe. The
instrument requires virtually no assembly. You simply install the software and
plug the USB Control Unit with probe into your computers USB port. The USB
foot switch can either be plugged in the A-Scan Plus Connect Control Unit or
any unused USB port in the computer.
What you Need
For a complete Accutome A-Scan Plus Connect environment you will need the
following:
• Windows based Personal Computer
• Accutome A-Scan Plus Connect Control Unit
• Accutome A-Scan Plus Connect 10MHz composite probe
• USB Footswitch
• Accutome A-Scan Plus Connect software
• A-B type USB cable (Control Unit to laptop computer)
• Printer (to print out reports)
Note: It is recommended that the PC be compliant with IEC 60601-1 and IEC 60601-1-2.
• Windows based XP SP2 or newer
• Intel Core 2 Duo (2.40GHz or higher)
• 4M L2 Cache, 66MHz
• 4 USB ports version 2.0
To Next Page
Loading...
