Accutome A-Scan Plus Connect - Measurement and Calculation Preferences

54
Accutome A-Scan Plus Connect User’s Guide
How to Set the Default Eye Type
When the Accutome A-Scan Plus Connect is set up at the factory, it is equipped
with predened eye types and specic velocities for the predened eye types.
The Accutome A-Scan Plus Connect has a default eye type setting so that every
time you start a new patient, you do not have to select an eye type.
When you start a new patient, the eye type displayed on the measure screen will
be the default eye type selected in the option screen.
Descriptions of the factory installed eye types and their characteristics are given below.
Eye Type
• Phakic - Setting for eyes with natural lenses. This will be the setting for
most patients
• Silicone Oil Filled - Phakic eye with silicone oil in the vitreous
• Dense Cataract - Using this setting when a dense cataract prevents
measurement of lens thickness
• Pseudo PMMA - Patient with Pseudophakic PMM
• Pseudo Silicone - Patient with Pseudophakic Silicone IOL
• Pseudo Acrylic - Patient with Pseudophakic Acrylic IOL
• Aphakic - Patient with no lens, lens is not measured or assumed
• Phakic + ICL - Phakic eye with ICL implanted