Accutome A-Scan Plus Connect - Figure 3-25 Calculation Complete

34
Accutome A-Scan Plus Connect User’s Guide
8. After entering the K1 and K2 values, the emmetropic power is calculated
and displayed for each IOL.
9. Enter the ametropoic Target value in the designated area as shown in
Figure 3-25. Position the mouse over the entry and left click. Type in the
target refraction and press enter.
10. The IOL Calculation Screen will display the ametropoic power of the
lens, for each lens, with the bold, large, black numbers. These values
are the optimal lens, and do not necessarily exist in the real world. The
Accutome A-Scan Plus Connect also provides you with the power of the
IOL that would achieve emmetropia. The emmetropic power is calculated
and displayed under the ametropoic power in a smaller font.
Figure 3-25 Calculation Complete