58
Accutome A-Scan Plus Connect User’s Guide
Immersion
The immersion technique is where a scleral immersion shell is used with
immersion uid to couple the probe to the eye. No contact between the probe
and the cornea occurs.
Selecting the Default Scan Method
The A-Scan Plus Connect has a scan method setting so that every time you start
a new patient, you do not have to select the scanning mode.
When you start a new patient, the scan mode displayed on the measure screen
will be the default scan mode selected in the options screen.
Using the mouse, position the cursor over the preferred scanning method and
left click.
The scan method may also be changed on the measure screen as needed. Every
time a new patient is started, the setting will return to the default screen.
Figure 5-16 Selecting Default Scan Method
To Next Page
Loading...
